Quarterbore.Net Forums


Go Back   Quarterbore's Forums > Knife Forums > Ontario Knife Works M9 Bayonet
Home Forums Classifieds Photo Server FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2009, 09:09 PM
Robert Boyd Robert Boyd is offline
Junior Member
 
Join Date: Apr 2009
Location: Jim Thorpe, PA
Posts: 5
Question Ontario M-9 for Mossberg 590

I am interested in the Ontario M-9 for my Mossberg 590, but would like to make sure it will fit. I've seen some blogs where they say it will. Ontario says to contact Mossberg, but have not heard back from Mossberg yet. Anyone able to shed some light on this? Thanks, Rob (new member)
Reply With Quote
  #2  
Old 04-29-2009, 10:05 PM
porterkids's Avatar
porterkids porterkids is offline
Super Moderator
M9 Bayonet Collectors Club
 
Join Date: Mar 2005
Posts: 672
I believe that any M7 or M9 bayonet will fit, except maybe some of the Chinese M9 copies. Some of them have smaller diameter muzzle rings.
Reply With Quote
  #3  
Old 04-29-2009, 11:29 PM
Robert Boyd Robert Boyd is offline
Junior Member
 
Join Date: Apr 2009
Location: Jim Thorpe, PA
Posts: 5
Thanks porterkids, How does it attach? Does it replace the magazine cap?
Reply With Quote
  #4  
Old 04-30-2009, 07:02 AM
porterkids's Avatar
porterkids porterkids is offline
Super Moderator
M9 Bayonet Collectors Club
 
Join Date: Mar 2005
Posts: 672
Here's a link to an auction that shows a 590 with bayonet attached.

http://www.gunbroker.com/Auction/Vie...Item=127549810
Reply With Quote
  #5  
Old 05-03-2009, 08:15 PM
pwcosol pwcosol is offline
Senior Member
 
Join Date: Apr 2005
Posts: 158
A several years back I decided to get rid of a Winchester M97 I had. The 30 inch barrel had been tastefully cut down to the "riot model" length, and my intention was to get a repro trench shield/bayonet lug attachment for it. However, I heard about the Mossberg M590A1, and found one at a local shop. I had been told these were overruns made for the government, having the thicker mil-spec barrel, metal trigger guard, and most importantly, a bayonet lug! In any event, I have tried several bayonets on it. The OKC 3s seems to fit, but is tight in fitting/locking the last 1/4 inch. Ran into the same problem with a Phrobis 3-line M9. A US M7 snaps on without a hitch, and so have three Lan-Cay M9s. I suspect the bayonet lug bay be @ maximum spec which has resulted in the interference experienced when attaching some bayonets...
Reply With Quote
  #6  
Old 05-04-2009, 08:58 PM
Robert Boyd Robert Boyd is offline
Junior Member
 
Join Date: Apr 2009
Location: Jim Thorpe, PA
Posts: 5
Wink Received my Ontario M9, fits my Mossberg 590 like a glove, no accesories needed! YES!

Thanks for the feedback all. - Rob
Reply With Quote
  #7  
Old 05-04-2009, 09:03 PM
Robert Boyd Robert Boyd is offline
Junior Member
 
Join Date: Apr 2009
Location: Jim Thorpe, PA
Posts: 5
Question M9 Maintenance

Ontario didn't send any tips for cleaning, sharpening, etc. Anyone have any suggestions, other than the usual common sense? (still got some of that, thankfully!)
Reply With Quote
  #8  
Old 05-05-2009, 05:13 AM
Carlo's Avatar
Carlo Carlo is offline
Senior Member
M9 Bayonet Collectors Club
 
Join Date: Mar 2005
Location: Italy
Posts: 487
Quote:
Originally Posted by Robert Boyd View Post
Ontario didn't send any tips for cleaning, sharpening, etc. Anyone have any suggestions, other than the usual common sense? (still got some of that, thankfully!)
I would suggest to read the technical manual
http://www.m9bayonet.com/library/TM9-1005-237-23P.pdf
where you'll be probably able to find answers and much more!
I personally use some gun oil to clean the bayonet.
As for sharpening, take a look here
http://www.buckknives.com/resources/...structions.pdf

Last edited by Carlo; 05-05-2009 at 05:17 AM.
Reply With Quote
  #9  
Old 05-05-2009, 06:11 PM
Robert Boyd Robert Boyd is offline
Junior Member
 
Join Date: Apr 2009
Location: Jim Thorpe, PA
Posts: 5
Thanks Carlo

Appreciate the info!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.